Need Your Air Tanks Refilled? We’ve Got You Covered!
We can fill compressed air cylinders for:
- Scuba
new & used tanks* - SCBA*
2216 & 4500 (special)
*Current TC and Visual test requirements apply.
Tanks are tested every 6 months for quality assurance.
On-site cylinder inspections – Visuals and Hydrostatic testing
We can generally fill most cylinders on site while you wait from Monday to Saturday.
We can fill EAN/Nitrox tanks at our off-site facility (1-2 day turnaround so call ahead)
Please contact us if you have any questions and stop in next time you’re out of air!
SERVICE & FILL RATES
Air Fills 50/63/72/80 cu ft $9 +HST
90/95/100 cu ft $14 +HST
over 100 cu ft or over 3000 psi $15 +HST
Nitrox EANx 32% 80 cu ft $16 +HST
Basic Regulator Service Check Extensive Cleaning & Additional Part and/or Labour is extra, if applicable $25 +HST
Hydrostatic Test
Includes Visual & Air FillExtra air fill rate for tank over 80 cu ft and/or over 3000 psi $45 +HST
Visual Test
Includes Air FillExtra air fill rate for tank over 80 cu ft and/or over 3000 psi $25 +HST
Labour Rates $55/hour
Lead Raw - $4.50/lb
Vinyl - $5.50/lb
Fill Policies:
- All cylinders must have a current hydrostatic test stamp and visual inspection decal.
- Cylinders used for gas mixtures other than air need to be properly cleaned and labeled.
- Empty cylinders must be visual inspected.
Note: We are not responsible for any equipment left for more than 30 days.